Often times you’ll come across a very common issue that keeps happening for a few reasons. This issue is when the hp printer printing blank pages. This could be a very annoying occurrence as you don’t get notified about it. Nor do you get a prompt that states you why this is happening.

However, if unfortunately, you have been facing this, then do not worry! Just like any other problem, this problem has solutions as well. Read the contents below to find out!

What Causes the HP Printer Printing Blank Pages?

Typically there are some minor reasons why printer printing blank pages hp and here’s why:

  • Toner or the Ink Cartridge Is empty.
  • Incorrect Installment of cartridges.
  • The paper size is not in alignment with the paper tray due to incorrect size.
  • The cartridge is clogged.

Easy Fixes for HP Printer Printing Blank Pages!

So if you’re asking how to fix hp printer printing blank pages, here are a few things that you could apply if your printer is relentlessly printing blank pages on every attempt. Make sure to locate WPS Pin on HP printer before jumping in the below-mentioned steps.

Tip 1: Upgrade The Printer Driver 

This should be the most viable option to start with. Any time the driver gets damaged, update fixes it all. Usually, the drivers either get corrupted or that it simply is out of date. This could be one of the reasons why hp printer printing blank pages.

You could get the compatible driver for the HP printer from the manufacturer’s official website. Once you’re on the page, download the suitable driver and then install it. After that, check whether the printer is still printing blank pages or not. 

Tip 2: Check If The Ink Cartridges Are Working Or Not

Often times you may not notice but ink cartridges do get clogged. Also, if the installment of the cartridge is not correct, then you are likely to face this problem.

Check if the printer is clogged or not. If you see that the printer is clogged then simply clean the cartridge manually or from the control panel.

In addition to this, do check if the ink level in the cartridge is sufficient or not. If it is necessary, try replacing the cartridge with a new one.

You may also have a defective cartridge or that it is not installed correctly. In that case, remove the cartridge from the printer and re-install it. Or simply get a new one.

After you’ve checked all the above-mentioned factors, try printing a page to check if this tip helped or not. 

Tip 3: Run Troubleshooter In Windows

Windows have an in-built function that has the ability to detect any problem with any device connected to the system. To do that, here’s what you need to follow:

1. For Windows 7/8

Go to the “Start” option and simply search for the option called “troubleshooting”. Then click on the first option”. Then, go to the “Hardware and Sound” section and then click on the option called ‘Use A Printer”.

Then click on the “Next” option. Now, the troubleshooting will start and fix problems. After doing a trial by attempting to print a page and check if its blank or not. 

2. For Windows 10

Similarly, as in windows ⅞, go to the “Start” button and then type “Troubleshooting”. Then click on the option called “Troubleshooting settings”. Then click on “Printer and then choose the “Run As Troubleshooter”

After the troubleshooting is finished, print out a written page to check. 

Tip 4: Run Printer Spooler Service

There are certain files, precisely “Spooler Files” that are related to the printer. These files upon getting damaged, can cause the printer itself to print blank pages. All you need to do is configure it.

Click on the “Start” option and then search for “Services” in the search bar. Then, in the “Services” box, double-click on the option called  “Printer Spooler”. Then click on the “Stop” button and then click on the “OK” option.

Now, using the Windows and the E button, open the “Windows File Explorer”. Now go to the address field and visit the section “C:\windwo\System32\spool\PRINTERS:” In here, get rid of all the files as well as the folders.

Then, again, go to “Services” from the “Start” menu on the desktop. Locate and double click on the same “Printer Spooler” option. However, this time, Make the “Startup” type to “Automatic” and then click on the “Start” option under it.

Then exit the “Services” box by clicking on the “OK” button. Print a written page to verify if the issue is solved or not. 

Tip 5: Check The Paper Size

You may have made any modification of the default paper size. This can be a confusing state fro the printer to comprehend. This is because the printer runs on a default page setting with its default page size.

To make this right, simply go to the “Printer Settings” and simply choose the right size that the printer can understand. Then try printing a page to check if it worked out or not.